There are many ways to improve the sound coming from your car speaker system. Two car amplifiers may be bridged together which will be helpful in improving the sound. For driving the big speakers this kind of system can also give a very high power. Speakers like sub woofers can be given very high power using this. The amplifiers are to be connected correctly for the first time. A wrong hook up may also lead to burning of either amplifiers or your speakers or even both. But how to bridge two car audio amps?
There are few tools required for doing this process. It includes pliers, 2 car audio amps, wire strippers, wrench, wire rated for the amplifiers. These tools will help in the accomplishment of task in a simpler way and easier way too.
The first step is to carefully study the instruction manual to ensure which two amplifiers can be connected together. Power compatibility will determine if the bridge would be safe or not. Sometimes we may have a doubt if these two amps can be bridged. In that case don't make an attempt to do that as it may burn the amps. Safe bridging is very important or else the loss incurred from improper connection may become very expensive.
Next step is to stop the power supply to the amps. Power supply to the amps can be stopped easily by disconnecting the positive cable from the battery of the car. This should be done before any connections are made. To remove the cable we may take help of the wrenches and pliers. Power supply should be completely stopped till our work is completely done .
While buying an amplifier please do check for the presence of the bridge switch. In most amplifiers it is present at the back edge of the amplifier which can be easily spotted. If it is not in bridge mode set it back to that mode. In the next step inch insulation is stripped off from the wire at both ends.
The most important thing to be done is the connection of the wires. The positive terminal of one amplifier holds one end of the wire while the other end is held by the negative terminal of the other amplifier. This can be performed by wrapping them around its corresponding terminal and then screwing them down. There is a clear distinction between the positive and negative terminals which is given by its color difference where red indicates positive and black indicates negative terminal.
The last step is to make the connections complete. Now we have to connect the amplifiers to the speakers. Only one terminal either positive or negative is used for connection with the wire. The other terminals of amplifiers which are free should be connected with the terminals on the speaker. Always ensure that we connect positive terminals of speakers and amplifiers together and negative terminals of speakers and amplifiers together. The speaker system now has improved sound after bridging of amplifiers . Browse through web sites like ehow com for further free tips.
This article would have proved to be effective in guiding us on How to Bridge Two Car Audio Amps by instructing and explaining all steps with useful suggestions and tips.
About the Author:
| < Prev | Next > |
|---|
